Supported protocols
TCS-NET talks to the devices you already have over nine industrial protocols.
List of protocols
| Protocol | Commonly used for | Writes to the device |
|---|---|---|
| Modbus TCP | PLCs, meters, drives over Ethernet | Yes |
| Modbus RTU | RS-485 serial devices | Yes |
| OPC UA | OPC UA servers of PLCs and systems | Yes |
| MQTT | IoT sensors and brokers | Yes |
| EtherNet/IP | EtherNet/IP devices | Yes |
| Siemens S7 | Siemens S7 PLCs | Yes |
| BACnet | Building and HVAC systems | Yes |
| SNMP | Network devices, backup power | Not yet, read only |
| CANopen | CAN network devices | Not yet, read only |
A note on Modbus
With Modbus you enter the address by the PLC's memory area name (such as D, M, Y) rather than a register number; TCS-NET converts it for you. An address table is built in for the Delta DVP PLC family.
Writing to devices
Writing to a device is off by default and has several layers of protection. The details are on the Device control page.
Device control
Device control: switch on, control and audit.