Skip to main content
Guide menu

Connect your first device

Add a device and a tag, then watch the value change in real time.

Sign in

Open the app and sign in with the administrator account created at installation. The Overview page gives a general view of your devices.

Add a device

  1. 01

    Open Device Management

    Choose Device Management in the sidebar, then press Add device.

  2. 02

    Pick a protocol

    Choose one of the nine protocols (see Supported protocols). The fields to fill in change with the protocol.

  3. 03

    Enter how to connect

    For a device on the network: Host (the IP address) and Port. Modbus also has a Unit ID; a serial device has a communication port. Timeout (s) is how long TCS-NET waits for the device to answer.

  4. 04

    Save

    The device appears in the list. Connected or Disconnected tells you whether TCS-NET can talk to it.

Add a tag

A tag is one value to read: a temperature, a pressure, a running state, an output count. Open the device and press Add tag.

  • Name and unit (for example °C), so the viewer understands the value.
  • Address: where the value sits in the device. For Modbus, the address field has a preview so you can check it.
  • Data type: integer, float, bit, coil or text.
  • Poll interval (ms): how often to read.
  • Writable: off by default. Turn it on only when you really want to control this value (see Device control).

See live values

Once the tag is saved, its value shows in Device Management and changes in real time. The data is also stored, to draw trends, make reports and build SCADA screens.

Limits of the Standard edition

Standard allows up to 2 devices, with up to 2 tags each. Adding beyond that is refused. What you already have is always kept and never deleted; Premium removes every limit.

  • Licensing

    Licensing: Standard, Premium and how to activate a key.